The GP Graphene Coating is our latest advancement in exterior paint coatings. We've infused our Ceramic Coating with Graphene, one of the hardest materials known to man.
Compared with our Ceramic Coating, the Graphene Coating has increased durability and allows for extended working time during the application process due to a longer cure time. Our Graphene Coating is also more resistant to water spotting and bird droppings by improved dispersion of heat on the coated surface.
Use the Boost spray as a cure-time accelerant for the Graphene Coating!
Reduced Water Spotting Compared to traditional Ceramics
Acts as a "sacrificial" layer that takes the beating of daily abuse to protect your paint
*Note: Graphene Coatings require proper paint preparation and correction prior to application for the best results. Recommended for experienced car detailers.
Prior to coating application, wash and prep the paint to remove any contaminants, imperfections, or residual chemicals
Apply 6-8 drops of coating to the microfiber applicator pad.
Start with the top surfaces of the vehicle (hood/roof) and then move to the sides of the car to avoid creating accidental blemishes in the uncured coating
Working in sections, wipe the coating onto the paint in smooth, straight lines from the front of the car toward the back
Once applied to a section, wait 2-5 minutes (depending on temperature and humidity) until the coating flashes and becomes "tacky". Then inspect the coating for high spots and level them out using a microfiber towel or buffing pad.
Once the entire vehicle has been coated and leveled, the coating will continue to cure for the next 24 hours and should not come in contact with any caustic or acidic substances such as detergents or bird droppings
If the coating comes in contact with any of these contaminants before it's fully cured, just spray the Boost Silica Sealant and wipe the surface clean with a clean microfiber cloth.
The coating will continue to harden for the next 10-14 days until it reaches its fully cured hardness. Continue to avoid caustic/acidic substances during this time.
In the event that your vehicle has any dust, debris or contaminant build-up during this time, a rinse with clean water and a gentle hand wash using the S2 PH Neutral or S3 Silica Soap is recommended
Continue to maintain the effectiveness of your coating by using only PH Neutral soaps to avoid breaking down the coating with harsh detergents