Hot Spot Water Spot Remover
Hot Spot Water Spot Remover
Hot Spot Water Spot Remover
Hot Spot Water Spot Remover
Hot Spot Water Spot Remover
Hot Spot Water Spot Remover

Hot Spot Water Spot Remover

$33.00
/
Shipping calculated at checkout.

Pro Detailer? Get Pro Pricing

Size
  • Pro-Grade Strength
  • Ceramic Coating Safe
  • In stock, ready to ship
  • Inventory on the way

Hot Spot removes stubborn hard water spots from glass and painted surfaces

Hot Spot is the ultimate solution for removing hard water deposits. Our water-based gel has a mildly acidic formula to quickly and easily dissolve water spots on paintwork and glass caused by mineral buildup left behind when water evaporates on a vehicle. 

Features & Benefits:

  • Removes water stains from paint and glass
  • Water-based, mild acidity
  • Easy to use - just apply, allow to dwell for a few seconds, wipe, and rinse
  • Gel formula clings where it's applied

*Caution: Hot Spot should not be used on aluminum surfaces, as the acid can have undesired effects on its appearance

Product Application

1. Wash/clean the vehicle and park out of direct sunlight
2. Apply Hot Spot to a microfiber applicator or microfiber towel and work in 2 ft. x 2 ft. sections, using a cross-hatch pattern. Allow the product to dwell for up to 30 seconds
3. Rinse the area with cool water and clean to neutralize Hot Spot
4. Repeat steps 2+3 for more stubborn water spots
5. Clean the surface and apply a protective coating such as BOOST or Graphene Spray to prevent future water spots

      This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

      Water Spot Remover

      As water dries and evaporates from the surface of a vehicle, the microscopic minerals in that water are left behind and create ugly, difficult to remove water spots that can lead to permanent damage.

      Hot Spot Water Spot Remover is a highly effective solution to breaking down and removing these mineral deposits from paint and glass to restore vehicles to a spotless shine.

      Pro Grade

      Heavy Duty Strength

      The thick formulation is acid-based to quickly, safely, and effectively break down hard water deposits on paint or glass

      Safe and

      Easy-to-use

      Simply apply to the affected areas, allow it to dwell, rinse thoroughly, and wipe it off. Simple as that! Repeat as-needed for more stubborn water spots.

      Instructions

      1. Wash/clean the vehicle and park out of direct sunlight. Ensure the surface is cool to the touch.
      2. Apply Hot Spot to a microfiber applicator or microfiber towel and work in 2 ft. x 2 ft. sections, using a cross-hatch pattern. Allow the product to dwell for up to 30 seconds
      3. Rinse the area with cool water and clean to neutralize Hot Spot
      4. Repeat steps 2+3 for more stubborn water spots
      5. Clean the surface and apply a protective coating such as BOOST or Graphene Spray to prevent future water spots

      Testimonials

      ★★★★★

      The water in our area has a high concentration of mineral content so we see a lot of clients with water spotting - Hot Spot has been amazing for taking care of it.

      Owner, Detail Shop
      Albany, NY
      ★★★★★

      I didn't think I'd ever get rid of the water spots on my windshield - this product is amazing

      Mike Screnci
      Casper, WY
      ★★★★★

      Hot Spot was easy to work with and smells just like Big Red gum. Highly recommend

      Mobile Detailer
      Sarasota, FL

      FAQs

      1. Wash/clean the vehicle and park out of direct sunlight. Ensure the surface is cool to the touch.
      2. Shake the bottle well and apply Hot Spot to a microfiber applicator or microfiber towel and work in 2 ft. x 2 ft. sections, using a cross-hatch pattern. Allow the product to dwell for up to 30 seconds
      3. Rinse the area with cool water and clean to neutralize Hot Spot
      4. Repeat steps 2+3 for more stubborn water spots

      To protect your vehicle from water spots, it's a good idea to apply a protective coating such as BOOST, Graphene Spray, Graphene Coating, or Ceramic Coating to prevent future water spots

      Hot Spot is an acid-based blend that's formulated to effectively break down mineral deposits so if left on the surface for an extended period of time without being rinsed off, it can potentially cause damage to the clear coat. Always rinse thoroughly to neutralize the product.

      Recently viewed

      Back to Clean